News

Years ago, vehicles were equipped with carburetors and required a longer cranking time to start. In many instances this longer cranking time would reveal a weak battery. You could actually hear the cranking power reduced especially in cold weather. When fuel-injected engines became the norm this was not as evident due to the fact that the vehicle starts up quicker.

A sudden change in temperature usually takes a weak battery out. That’s why the day before your vehicle may have started fine, with no warning of a problem. Then an extreme change in the weather (hot or cold) causes the weak battery to die, seemingly without a warning.

Why do batteries fail?
It’s unusual for a battery to malfunction because of a defect, driving habits are the usual cause. Using a lot of vehicle accessories and driving short distances prevents the battery from fully charging. Extended idling with heavy accessory use or driving a short distance only once a week can also reduce battery performance.

When the battery does not have an opportunity to charge fully, acid stratification occurs. The electrolyte (battery acid) in a stratified battery concentrates on the bottom. It is similar to the way sugar granules collect on the bottom of a cup of coffee before it is stirred. Batteries tend to stratify if kept at low charge (below 80%) and don’t get the opportunity to receive a full charge. For example, short distance driving while running windshield wipers and electric heaters contributes to acid stratification. Acid stratification reduces the overall performance and life of the battery.

How to protect the battery
Check your battery regularly and keep the connections clean. Also clean the area around the battery hold down. Usually if a battery is super corroded the terminals leads are no longer airtight. If you clean your battery terminals and cables and the corrosion returns, replace the battery. If your battery is four years old and corroded, replace the battery.

Having your maintenance done regularly at Finish Line will allow us to check the condition of your battery and reduce the chances of being surprised with a dead battery.